Health Risk Assessment of Exposure to Air Pollutants Exceeding the New WHO Air Quality Guidelines (AQGs) in São Paulo, Brazil.

We applied the AirQ+ model to analyze the 2021 data within our study period (15 December 2020 to 17 June 2022) to quantitatively estimate the number of specific health outcomes from long- and short-term exposure to atmospheric pollutants that could be avoided by adopting the new World Health Organization Air Quality Guidelines (WHO AQGs) in São Paulo, Southeastern Brazil. Based on temporal variations, PM2.5, PM10, NO2, and O3 exceeded the 2021 WHO AQGs on up to 54.4% of the days during sampling, mainly in wintertime (June to September 2021). Reducing PM2.5 values in São Paulo, as recommended by the WHO, could prevent 113 and 24 deaths from lung cancer (LC) and chronic obstructive pulmonary disease (COPD) annually, respectively. Moreover, it could avoid 258 and 163 hospitalizations caused by respiratory (RD) and cardiovascular diseases (CVD) due to PM2.5 exposure. The results for excess deaths by RD and CVD due to O3 were 443 and 228, respectively, and 90 RD hospitalizations due to NO2. Therefore, AirQ+ is a useful tool that enables further elaboration and implementation of air pollution control strategies to reduce and prevent hospital admissions, mortality, and economic costs due to exposure to PM2.5, O3, and NO2 in São Paulo.

Biodegradable CA/CPB electrospun nanofibers for efficient retention of airborne nanoparticles.

The increase of the industrialization process brought the growth of pollutant emissions into the atmosphere. At the same time, the demand for advances in aerosol filtration is evolving towards more sustainable technologies. Electrospinning is gaining notoriety, once it enables to produce polymeric nanofibers with different additives and also the obtaining of small pore sizes and fiber diameters; desirable features for air filtration materials. Therefore, this work aims to evaluate the filtration performance of cellulose acetate (CA) nanofibers and cationic surfactant cetylpyridinium bromide (CPB) produced by electrospinning technique for retention of aerosol nanoparticles. The pressure drop and collection efficiency measurements of sodium chloride (NaCl) aerosol particles (diameters from 7 to 300 nm) were performed using Scanning Mobility Particle Sizer (SMPS). The average diameter of the electrospun nanofibers used was 239 nm, ranging from 113 to 398 nm. Experimental results indicated that the nanofibers showed good permeability (10-11 m2) and high-efficiency filtration for aerosol nanoparticles (about 100 %), which can include black carbon (BC) and the new coronavirus. The pressure drop was 1.8 kPa at 1.6 cm s-1, which is similar to reported for some high-efficiency nanofiber filters. In addition, it also retains BC particles present in air, which was about 90 % for 375 nm and about 60 % for the 880 nm wavelength. Finally, this research provided information for future designs of indoor air filters and filter media for facial masks with renewable, non-toxic biodegradable, and potential antibacterial characteristics.